1. Release the fuel tank of all accessories

2. Wash with TANK SLOSH KLEEN to remove residue and dirt and clean the fuel tank.

Directions for use: Pour the solution < andm >TANK SLOSH KLEEN inside the fuel tank together with some small sharp stones. Shake fuel tank vigorously to ensure that the solution creates foam and that in conjunction with clean stones promotional inside of the tank. If necessary you can use a pressure machine to remove the waste.  < span style = "font-family: arial, helvetica, sans-serif; font-size: 12pt; " >Once clean, the fuel tank must be washed with cold water and left to dry completely before the next step
TANK SLOSH KLEEN In addition to clean will leave a residue and rust inhibitor protector

p style = "< text-align: justify; " >
3. In the case of the fuel tank present rust inside, this must be removed with < andm >PHOS-KLEAN B. 
Directions for use: Wash with PHOS-KLEAN B and leave to dry. The rust is removed, and it should be steel gray color. Wash again with cold running water to remove and neutralize any phosphoric acid deposits. Let dry thoroughly before application of sealant.

4. Renew and seal the inside of the fuel tank with the penetrating and flexible coating, which chemically bonds to the surface of metals, SLOSH TANK SEALER .

Directions for use:ssegurar that the fuel tank was cleaned with < andm >TANK SLOSH KLEEN and is free from any residue of old fuel, dirt, rust and dry. We must also ensure that any threaded holes are properly owhile protected. Shake well the Tin with the mixture SLOSH TANK SEALER and to pour it in full into the fuel tank. Slosh backwards and forwards by rotating 360 degrees to ensure that all tank is coated. Leave for 10 minutes and repeat the process. Pour the remaining sealant on Tin, before this dry and get hard

NOTE: we advise you to let the fuel tank for 5 to 7 days, so < in>SLOSH TANK SEALER can dry out and harden completely. The fuel tank will dry and enrijecerá faster on a humid environment, so one should not force drying.

5. Care in handling: always use protective gloves, eye protection and appropriate respiratory protection equipment throughout the application.